V4 MIL/LEO Adapter Trijicon RMR / SRO / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP Fits GLOCK MOS

$76.95

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE. 

**THIS ADAPTER PLATE MODEL IS NOT COMPATIBLE WITH THE TRIJICON RCR. FOR AN ADAPTER PLATE COMPATIBLE WITH THE RCR CLICK HERE**

DIRECT MILL YOUR OPTIC CLICK HERE

 

(24 customer reviews)

In stock

Frequently Bought Together

Do-It-Right Bundle: Check all three of these products and hid "add to cart" for a 15% discount!

+ +
Price for all three: $157.12

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

Most of our plates feature a patented stainless steel T-Nut which provide an industry leading six to seven threads of engagement.  Since all the mounting hardware is replaceable, if any mounting hardware is damaged it can be replaced without replacing the entire plate.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

Replaceable 416 Stainless Steel T-Posts for maximum thread engagement

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – M3 x 6 MM FH Plate Mounting Screws

Qty 3 – 4-40 x .320 FHB Trijicon RMR Optic Mounting Screws

Qty 3 – 4-40 x .280 FHB Holosun 507C / 508T Optic Mounting Screws

Qty 3 – 4-40 x .345 FHB Trijicon SRO , CHPWS COMP / EDC XL Optic Mounting Screws

Qty 3 – 4-40 x .250 FHB Optic Mounting Screws 

Qty 3 – Patented 416 Stainless Steel T-Nuts

DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

MANUFACTURER

MODEL

, , , , , , , , , , ,

RED DOT

, , , , ,

24 reviews for V4 MIL/LEO Adapter Trijicon RMR / SRO / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP Fits GLOCK MOS

  1. Larry (verified owner)

    Best MOS plate I have ever seen or used. The addition of the T-Nut takes it to a whole new level of greatness. Recommend this plate and C&H products. Will continue to use and enjoy C&H products when ever I can.

  2. Russell Malenchek (verified owner)

    Followed the video and info on the website to install, with the exception of using a limiter. I prefer to hand tighten and adjust as needed via feedback from staking with paint markers. I put about 500 rounds through my G34 with newly mounted SRO. No complaints so far, solid product.

  3. csealleo (verified owner)

    I have heard great things about this adapter plate, so I ordered one along with the mounting kit with the 10 inch lb limiter and paint markers. When it arrived I removed the Glock OEM plate and RMR and followed the white paper instructions and watched the video on how to install the new C&H plate. I like the idea of the T-nuts but I had one T-nut that didn’t make it to the 10 inch pounds before it broke and the threads separated from the base of the T-nut now I have a screw with vc3 and the threads of a T-nut so the screw is no good. I got on C&H website and you can get more T-nuts at zero cost except that I had to purchase a screw kit as well at $8 and pay $10 shipping and handling and now I have to wait another two weeks to receive those before I can try again. I think extra T-nuts and maybe an extra screw should have been provided with the kit especially since the T-nut are a zero cost anyway. Now I have a Duty gun that I had to revert back to iron sights until I receive new parts I had to order.

  4. csealleo (verified owner)

    I have heard great things about this adapter plate, so I ordered one along with the mounting kit with the 10 inch lb limiter and paint markers. When it arrived I removed the Glock OEM plate and RMR and followed the white paper instructions and watched the video on how to install the new C&H plate. I like the idea of the T-nuts but I had one T-nut that didn’t make it to the 10 inch pounds before it broke and the threads separated from the base of the T-nut now I have a screw with vc3 and the threads of a T-nut so the screw is no good. I got on C&H website and you can get more T-nuts at zero cost except that I had to purchase a screw kit as well at $8 and pay $10 shipping and handling and now I have to wait another two weeks to receive those before I can try again. I think extra T-nuts and maybe an extra screw should have been provided with the kit especially since the T-nut are a zero cost anyway. Now I have a Duty gun that I had to revert back to iron sights until I receive new parts I had to order.

  5. Robert Lott (verified owner)

    I recently installed the V4 and I am thoroughly impressed. The adapter is as perfect a fit as could ever be possible. The YouTube installation video was excellent. Great part and great shipping.

Only logged in customers who have purchased this product may leave a review.