SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

$60.45

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

**FOR TRIJICON RCR, READ THE DESCRIPTION BELOW**

**This plate is for slides that DO NOT LOSE the rear iron sight when the cover plate is removed** 

DIRECT MILL YOUR OPTIC CLICK HERE

(68 customer reviews)

Out of stock

Want to be notified when this product is back in stock?

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES ABOVE TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

This filler plate does not require any additional screws.  It is held in place with the RDS and it’s mounting screws.

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – 6-40 x .380 M3H Holosun 507C / 508T Optic Mounting Screws

Qty 3 – 6-40 x .460 M3H Trijicon RMR / SRO , CHPWS COMP / EDC XL Optic Mounting Screws

**Trijicon RCR**

The RCR Optic comes with Trijicon screws that are “Patented”.  You must use the screws they provide you.  C&H will not make new screws for this optic / plate combo.  It is the responsibly of the consumer to check fitment of the provided screws for length. The screws may have to be slightly modified or shortened in order to ensure proper fitment.

Agency / Department Discount Program

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

Weight .3 lbs
MANUFACTURER

MODEL

,

RED DOT

, , , , , ,

68 reviews for SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

  1. Mark Haley (verified owner)

    I’ve recently purchased this plate to mount a Holosun 507C on my both my P320 AXG PRO and Scorpion. These plates are an absolute must and look awesome when installed. My only issue was the plate being a tad bit too long, which required me to bend the plate up slightly to fit the slide cut. It was a bit worse for the Scorpion, most likely due to the cerekote finish. My only other issue was the mounting screws. Sig has told me that the thread size is actually M4-o.7 and not the supplied #6-40.

  2. Justin Brown (verified owner)

    I can’t say enough good things to say about this company. I had an issue with my work duty gun and needed this plate to fix it. I explained everything and had it in had by noon the next day. The plate works great and resolved all my issues. They have my business for life.

  3. Timothy Callahan (verified owner)

    Exactly what I needed to securely mount a 507c to my X5 Legion. High quality part and a great fit.

  4. David Rodriguez (verified owner)

    I purchased this for my AXG Scorpion. It fits perfectly and looks very high quality. Zero regrets on my purchase and my Trijicon RMR looks fantastic on the gun. Very glad I found this site. Highly recommended.

  5. CAROLYN MORROW (verified owner)

    This is it! Finally the thing I was looking for. I ordered two other parts form other companys and they were not the right part. I got my red dot mounted and it looks great. (Holosun HS507)

    Thank You
    Carolyn Morrow

Only logged in customers who have purchased this product may leave a review.