SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

$60.45

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

**FOR TRIJICON RCR, READ THE DESCRIPTION BELOW**

**This plate is for slides that DO NOT LOSE the rear iron sight when the cover plate is removed** 

DIRECT MILL YOUR OPTIC CLICK HERE

(68 customer reviews)

Out of stock

Want to be notified when this product is back in stock?

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES ABOVE TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

This filler plate does not require any additional screws.  It is held in place with the RDS and it’s mounting screws.

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – 6-40 x .380 M3H Trijicon RMR / RMR HD / SRO , Holosun 507C / 508T Optic Mounting Screws

Qty 3 – 6-40 x .460 M3H CHPWS COMP / EDC XL Optic Mounting Screws

**Trijicon RCR**

The RCR Optic comes with Trijicon screws that are “Patented”.  You must use the screws they provide you.  C&H will not make new screws for this optic / plate combo.  It is the responsibly of the consumer to check fitment of the provided screws for length. The screws may have to be slightly modified or shortened in order to ensure proper fitment.

Agency / Department Discount Program

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

Weight .3 lbs
MANUFACTURER

MODEL

,

RED DOT

, , , , , ,

68 reviews for SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

  1. cwar105 (verified owner) –

    Great plate for mounting onto the Sig AXG. It’s ultra thin, and was perfect for mounting the Holosun 507C X2 sight. Make sure to follow the pictures to make sure it’s the correct plate as the AXG has different threads on the mounting than other pistols. I really like the threads that are sent, there are 2 lengths, and I used the shorter lengths on the AXG. Clean with acetone, a little bit of locktite on the threads, and take a sharpie and draw a line across the torx head when finished to be able to see if the screws ever back out.

  2. cwar105 (verified owner) –

    Great plate for mounting onto the Sig AXG. It’s ultra thin, and was perfect for mounting the Holosun 507C X2 sight. Make sure to follow the pictures to make sure it’s the correct plate as the AXG has different threads on the mounting than other pistols. I really like the threads that are sent, there are 2 lengths, and I used the shorter lengths on the AXG. Clean with acetone, a little bit of locktite on the threads, and take a sharpie and draw a line across the torx head when finished to be able to see if the screws ever back out. Just watch the videos that CHP has on the site for more suggestions.

  3. cwar105 (verified owner) –

    Great plate for mounting onto the Sig AXG. It’s ultra thin, and was perfect for mounting the Holosun 507C X2 sight. Make sure to follow the pictures to make sure it’s the correct plate as the AXG has different threads on the mounting than other pistols. I really like the threads that are sent, there are 2 lengths and I used the shorter lengths on the AXG with the Holosun. Clean with acetone, a little bit of locktite on the threads, and take a sharpie and draw a line across the torx head when finished to be able to see if the screws ever back out. Just watch the videos that CHP has on the site for more suggestions.

  4. mjcarbin (verified owner) –

    Just what I needed for my 407c.

  5. weise57 (verified owner) –

    Bought this for my P320 AXG Scorpion to mount my Holosun 507C, fits like a glove. Used the short screws that came with the Holosun for the front 2 screws, had no problem,

Only logged in customers who have purchased this product may leave a review.

SKU: SGRX-RSH-FIL Category: Tag:

Related products