Springfield Armory XDM OSP to Holosun 407K / 507K & C&H EDC

$76.95

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.

(14 customer reviews)

In stock

Frequently Bought Together

Do-It-Right Bundle: Check all three of these products and hit "add to cart" for a 15% discount!

+ +
Price for all three: $157.12

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

INCLUDED:

Qty 1 – Optic Plate

Qty 4 – M3 x 6 MM FH Plate Mounting Screws

Qty 3 – 4-40 x .320 FHB Holosun 407K / 507K Optic Mounting Screws

Qty 3 – 4-40 x .345 FHB CHPWS EDC Optic Mounting Screws 

Agency / Department Discount Program

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

Weight .1 lbs
Dimensions 4 × 1 × 3 in
MANUFACTURER

MODEL

RED DOT

14 reviews for Springfield Armory XDM OSP to Holosun 407K / 507K & C&H EDC

  1. lovemybadkitty (verified owner)

    After my first review the company reached out to me and resolved my issue. Kudos to the management for doing that. Everything fits fine now on my XDM ELITE.

  2. lovemybadkitty (verified owner)

    I should’ve listened to reviews about the t-nuts not fitting properly. I tried to file down to get it to fit but will not fit properly! Don’t buy@ this price when parts don’t fit properly.

    • C&H Precision

      Dear Valued Customer,

      We sincerely apologize for the fitment issues you were experiencing. Looking back at your order history we did have a small batch issue with these plates when you ordered them. We have fixed the issue since then. I will reach out to you directly about fixing this issue immediately. Again I apologize for the inconvenience.

      Ian Jarrell
      Customer Service Manager

  3. rccoke (verified owner)

    Perfect fit, excellent finish and all required hardware included. I installed this on my XDM Elite 3.8 OSP for the Holosun EPS (same footprint for 407K).

    First, I purchased a plate from another vendor since this plate was out of stock. I had issues with that plate, The factory Holosun optic-to-plate screws did not fit–they were too small. Second, there was no finish on the plate it was discolored and starting to rust. I acquired the correct size of screws from my gunsmith, The threads were correct but the bevel of the screw head did not match the optic recess so the screwheads were just above flush.

    Once this plate came back in stock, I ordered it along with a spare set of screws (just to have spares). The plate is nicely finished and the Holosun screws fit perfectly. I installed the plate per C&H’s instructions, 10 in pounds for both plate to slide and optic to plate using the included thread locker.

    I like the clever design using T nuts which provides more threads for the screws and allowing a lightweight aluminum plate instead of steel. My next plate will definitely be a C&H P.

  4. Vince Girmscheid (verified owner)

    Excellent fitment for an XDM Elite 3.8″ 9mm, and Holosun EPS (407k footprint). I was going to grind the oem Springfield plate and make it work, but these plates retain another lug to locate the Holosun and add strength to holding the optic to the plate. Very fast shipping as well, thanks!!

Only logged in customers who have purchased this product may leave a review.