CZ P-10 V4 MIL / LEO to Trijicon RMR / SRO / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

$76.95

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE. 

DIRECT MILL YOUR OPTIC CLICK HERE

 

(12 customer reviews)

In stock

Frequently Bought Together

Do-It-Right Bundle: Check all three of these products and hit "add to cart" for a 15% discount!

+ +
Price for all three: $157.12

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

Most of our plates feature a patented stainless steel T-Nut which provide an industry leading six to seven threads of engagement.  Since all the mounting hardware is replaceable, if any mounting hardware is damaged it can be replaced without replacing the entire plate.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

Replaceable 416 Stainless Steel T-Posts for maximum thread engagement

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – M3 x 6 MM FHPlate Mounting Screws

Qty 3 – 4-40 x .320 FHB Trijicon RMR Optic Mounting Screws

Qty 3 – 4-40 x .280 FHB Holosun 507C / 508T Optic Mounting Screws

Qty 3 – 4-40 x .345 FHB Trijicon SRO, CHPWS COMP/ EDC XL Optic Mounting Screws

Qty 3 – 4-40 x .250 FHB Optic Mounting Screws

Qty 3 – Patented 416 Stainless Steel T-Nuts

Agency / Department Discount Program

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

MANUFACTURER

MODEL

RED DOT

, , , , ,

12 reviews for CZ P-10 V4 MIL / LEO to Trijicon RMR / SRO / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

  1. JC (verified owner) –

    Received my plate for a CZ P10C this past Friday. Upon inspection of the items, noted that the screws to secure the RMR to the plate were not pristine, and resembled someone taking a sharpie to a stainless steel screw to color it in. Chalking that up to non-ideal conditions, in terms of supply shocks and bit high demand.

    Next up, the plate itself seems fine, at least in terms of material. What surprised me was the finish being more of a powder-ash than the nitride finish I was fond on the Glock MOS RMR plate. Again, I’m going to chalk that up to current events.

    But the part that really irritated me was being given a set of M3 screws that not only required a smaller Torx bit that I don’t have in my inventory, they also would not screw into the holes that helped secure the plate to the slide. My fix was to search up hardware stores and find a set of M3 – .05x8mm screws that actually fit into the holes and looked proper.

    I’m going to continue using the plate, but I won’t recommend this plate to any other folks using a CZ P10 series as their everyday carry or their work gun.

  2. Adam Heiby (verified owner) –

    Perfect fit on my P-10C with trijicon RMR!

  3. Timothy Padgett (verified owner) –

    This is the third plate I have bought for different weapons, the first one was perfect. Well then the second one didn’t align as well as the first but did work out. Then let’s talk about the one for my CZ p10c. I will have to say that it was the worst fit for my optic a Holosun 507c the optic wouldn’t fit without some modification to the plate. I had to file the front of the plate just so the optic would fit then the countersink of the screws was terrible the screws didn’t sit flush to the plate and made the optic sit like a Teeter toddler. I Would have just returned the plate but waiting almost two weeks for delivery of the plate, I just didn’t want to wait any longer. All in all I ordered another one made from CZ USA and hope that there quality control has better standards and the shipping seems to be alot faster because it will be arriving in less then a week total time.

  4. Rush Shortley (verified owner) –

    These optics mounting plates by CH Precision are really fine, precision-made mounting plates. This is my second one, the first being for my Walther PDP FS 4.5. to mount a Holosun 509T. This plate was used to mount a Holosun 507C x2 with the ACSS Vulcan reticle by Primary Arms. The plate was shipped with all necessary screws, posts and thread locker. I was able to mount the plate and the sight with no problems. Before installation, I reviewed the CHP installation videos and followed them exactly, complete with the “staking” of the screws with an oil-based marker and indexing the screws with silver marker. I am very happy with the end result and am confident the setup will accomplish what I need for daytime home defense.

  5. Stephen Allen (verified owner) –

    This V4 MIL / LEO CZ P-10 RMR / SRO / Holosun 407 / 507 / 508”, works great on my CZ P10 S. Have a Holosun 507c X2 Red Dot on top. Easy to install on my CZ pistol.

Only logged in customers who have purchased this product may leave a review.

SKU: CZ-RSH Category: Tag:

Related products