You are purchasing:
QTY 1: T8 Torx Bit
QTY 1: T10 Torx Bit
Torx Bits T8 / T10
$4.99
Make sure you have everything on hand to get the job done!
QTY 1: T8 Torx Bit
QTY 1: T10 Torx Bit
In stock
Need Help Installing Your Plates? View Installation Instruction Videos
drw255 –
Worked perfectly well on basic driver and Wheeler handheld torque driver. Perfect to add to range bag for those just in case days where a loosened screw could ruin the day. Used for the removal of a Sig P226 Procut slide mounting plate and in turn to mount the Trijicon RMR to the slide in combination with RMR plate SG69-RSH-FIL.
Victor Zamora –
T8 tip broke off on its literal first use, remaining splines twisted around 30-degrees at the broken tip relative to the splines above it.
Larry –
Used these torx bits in my Wheeler torque driver and in my ratchet screw driver. Had no issues with either method. fit perfect into the installation screws.
Joseph Moniz –
Does Not fit any universal torx drivers. I tried Milwaukee and craftsman with no luck. The bits were too small to fit into the driver and be usable. I would only reccomend if you buy these with the torx driver they sell on here fore it otherwise Do Not Buy.