SIG SAUER SLIDE OPTIC MILLING SERVICE
From: $125.00
Slide Models: P320 / P365 / P220 / P225 / P226 / P229 / M11-A1 / SP2022
This page is for non-optic-ready Sig slides, to upgrade your optic-ready Romeo1 cut Sig P320/P226/P229 slide to the RMR or Romeo1 Pro cut or add RMR holes to the Romeo1 Pro cut click here. To upgrade your P365 Romeo0 cut to the Trijicon RMRcc footprint click here.
**The pictures of each modification are an example of what only choosing that modification will look like on the slide. Modifications performed may not look exactly as depicted depending on your slide model and the combination of serrations, windows, and/or pockets you chose.
**Holosun 509t, Aimpoint Acro, and Steiner MPS optics cannot be directly milled to SIG P320 slides and will require the slide to be milled for the Sig optic ready pro cut and the use of an adapter plate. There is an additional charge of $69.95 for the adapter plate needed.
**Some SIG P320 slides can’t be milled for a red dot due to the weight reduction cuts inside the slide. If we determine this is the case, we’ll send your slide back at no charge to you.
**SIG P365 slides can only be milled for micro red dots (Holosun 507k/EPS, Trijicon RMRcc, Shield RMsc, ETC.).
**SIG P220/P225/P226/P229 slides cannot be directly milled for any optic due to the deep cavity for the safety plunger at the rear of the slide. The only option we offer on these slides is to mill our “cross” cut to the depth of the base of the rear sight dovetail and use our cross adaptor plate to mount the optic to the slide. The cross adaptor plate adds an additional $126.50 to the cost of the milling.
** Older West German Sig slides with a rectangular firing pin block cannot be milled for an optic or cross plate.
Welcome to the #boomsquad!
Shipping instructions will be provided after your purchase.
We reserve the right to call and suggest changes or improvements to your slide milling job. Some slides can’t be milled and we will send them back at no charge if we determine it can’t safely be upgraded to an optics cut.
Shipping Instructions for Your Slide Customization:
- Remove the slide from your pistol.
- If you selected “disassembled”, remove all internals and iron sights
- Include a copy of your order confirmation or a note with your name, phone, email, and order number.
- Sending your optic is strongly recommended – it ensures perfect fitment, and we’ll mount it for free.
- Use a sturdy box. Do NOT use envelopes.
- Ship your slide using any major carrier: UPS, FedEx. WE STRONGLY DISCOURAGE discourage using USPS due to lost shipments and lack of tracking.
Send your package to:
CHPWS – “ATTN: Slide Milling”
55 Mustang Ct.
Richmond Hill GA 31324
Questions? – Call us 912-445-5803
Additional information
| Weight | 5.01 lbs |
|---|---|
| Dimensions | 6 × 1 × 1 in |
| SHIPPING: | |
| MANUFACTURER |
Terry Costakis –
I had C&H mill my P320 slide for a Holosun 407c. I couldn’t be happier with it. I shipped the slide and optic and had them back just over a week later. I only live about 30 miles away but didn’t feel like driving so I shipped it via UPS. Fitment is perfect and mounting was excellent. The slide had been cerakoted in the past and there were no scratches or marks on it.
I highly recommend them.