SIG P320 / P226 / P229 Romeo1 to Romeo1 Pro or RMR Footprint Optics Ready Upgrade
From: $50.00
Slide Models: P320 / P226 / P229 / P220
We offer to upgrade your factory SIG Romeo1 optic cut to the most recent SIG OEM optic cut – Romeo1 Pro Cut with RMR Holes
This includes upgrading the Romeo1 cut to Romeo1 Pro ($90), adding RMR holes to your Romeo1 Pro Cut ($50), or upgrading your Romeo1 cut to directly mount the RMR/SRO/Holosun 407c/507c/508t/507Comp ($90).
If you are trying to mount a Holosun 407c/507c/508t/507Comp or Trijicon RMR onto the Romeo1 Pro Cut there will be a gap at the front of the cut due to these optics being smaller than the Romeo1 Pro optic. Our Romeo1 Pro to RMR filler plate fills this gap providing a more secure fit for these optics.
Slides with the Romeo1 optics cut can also be upgraded to the RMR footprint to provide direct mounting of the Holosun 407c/507c/508t and Trijicon RMR optics without the need for a Romeo1 Pro to RMR filler plate.
**If you just need to add RMR holes to the Romeo1 Pro Cut it is a reduced rate of $50.
**P320s with a lightening cut that extends deeper into the slide in front of the existing left hand Romeo1 Pro screw hole cannot be milled for RMR holes or direct mount RMR cut as there is not enough material to add threads for mounting screws.
We reserve the right to call and suggest changes or improvements to your slide milling job. Some slides can’t be milled and we will send them back at no charge if we determine it can’t safely be upgraded to an optics cut.
Lead Times:
4 Weeks or less or your next milling is FREE!
The clock starts the day we receive your slide. The clock stops the moment we contact you to let you know your slide is done and ready to ship. We will not ship your slide until we have verified from you that your shipping address is correct.
Excludes slides that require Black Nitride (we don’t do this in house)
Excludes slides that require custom new BUIS sights or optics that are on backorder (we don’t make them and can’t control lead times)
Welcome to the #boomsquad!
Shipping instructions will be provided after your purchase.
Shipping Instructions:
Safely remove the slide from your pistol. Remove all necessary internal components and iron sights if you selected to send your slide disassembled. Wrap it up, box it up and send it to us using your favorite shipping method (FedEx Ground / UPS / USPS). Please include a copy of your paid invoice or a note with your name, phone number, email address, and order number. We STRONGLY recommend sending your slide in a box and not an envelope. Most envelopes we receive get ripped open during transit and we have received a few empty envelopes. If you want to make sure your slide gets to us safely BOX IT UP.
Send your package to:
CHPWS – “ATTN: Slide Milling”
456 Edsel Dr. Suite D
Richmond Hill GA 31324
Questions? – Call us 912-445-5803
Additional information
| Weight | 5.01 lbs |
|---|---|
| Dimensions | 6 × 1 × 1 in |
| SHIPPING: | |
| MANUFACTURER |
12 reviews for SIG P320 / P226 / P229 Romeo1 to Romeo1 Pro or RMR Footprint Optics Ready Upgrade
Only logged in customers who have purchased this product may leave a review.
rick-1359 (verified owner) –
I sent my M18 slide in for RMR holes to be drilled and tapped – everything looked good until I tried to put the slide internals back into it…the hole on the right side went just a little to deep and left a dimple inside the extractor spring housing making it impossible to install the extractor spring, after finding just the right size drill bit I was able to clean it up and put everything back together…only reason for the 4 star rating otherwise would’ve been 5 stars…otherwise it’s a great service.
James Dick (verified owner) –
I sent my P226 OR slide in to have the RMR holes added. It was a very smooth transaction. C&H called me after they received the slide just to confirm everything. They got it back to me in less than 3 weeks and the job was flawless.
The only thing I wish they would do differently is let the customer decide if they want signature confirmation for the return delivery. It’s not convenient for working folks who don’t have an adult home all day. I’d be happy to sign a disclaimer acknowledging I am accepting the risk, since it’s not a legal requirement,