Walther DEFENSE PDP to Trijicon RMR / SRO / HOLOSUN 407C / 507C / 508C / 508T

$69.95

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.  PERIOD!  PARAGRAPH!!

(5 customer reviews)

Need Torx Bits?

Select yes below to add 1 each T8 / T10 Torx Bits to your order.

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

Most of our plates feature a patented stainless steel T-Nut which provide an industry leading six to seven threads of engagement.  Since all the mounting hardware is replaceable, if any mounting hardware is damaged it can be replaced without replacing the entire plate.

SPECIFICATION:

Thickness:  V4 MIL / LEO Plates are .095″ to .099″ thick

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

Replaceable 416 Stainless Steel T-Posts for maximum thread engagement

INCLUDED:

Qty 1 – Optic Plate

Qty 2 – M3 Plate Mounting Screws

Qty 2 – 4-40 RMR Mounting Screws

Qty 2 – 4-40 Holosun Mounting Screws

Qty 2 – Patented 416 Stainless Steel T-Nuts

Qty 1 – VC3 Thread Locker

Additional information

Weight 1 lbs
Dimensions 6 × 1 × 1 in
MANUFACTURER

MODEL

RED DOT

5 reviews for Walther DEFENSE PDP to Trijicon RMR / SRO / HOLOSUN 407C / 507C / 508C / 508T

  1. Stephen Allen (verified owner)

    Great Optic plate, very good quality and craftsmanship to detail. Wish I had gotten the Silver M3 Screws with it for the plate. Had to use my optic slide cover screws to anchor it down on my slide. Using the Holosun 507c -gr X2 currently, haven’t shot any rounds yet, make sure it’s firmly anchored. Hopefully soon a trip to the shooting range.

  2. Stephen Allen (verified owner)

    Great Optic plate, very good quality and craftsmanship to detail. Wish I had gotten the Silver M3 Screws with it for the plate. Had to use my optic slide cover screws to anchor it down on my slide. Using the Holosun 507c -gr X2 currently, haven’t shot any rounds yet, make sure it’s firmly anchored. Hopefully soon a trip to the shooting range.

  3. Stephen Allen (verified owner)

    Great Optic plate, very good quality and craftsmanship to detail. Using the Holosun 507c -gr X2 currently, haven’t shot any rounds yet, make sure it’s firmly anchored. Hopefully soon a trip to the shooting range.

  4. Christopher Knox (verified owner)

    The plate seems well made and the finish is great. However….. it does not fit in the PDP’s slide cut as snugly as either of my C&H plates do in my P320’s. They snap in tightly. Zero gaps. The PDP plate is sloppy before the screws are installed and torqued. After its tightened down there are gaps at the front and back of the plate. When the 507c is installed it is also slightly loose. Even with the 4 posts. My RMR’s snapped into the plates tightly. With the optic torqued down there are gaps at the front and the rear of the optic. I contacted CS at C&H and they assured me that this was fine. They also offered to warranty the plate and send me a new one if I wasn’t happy with it. I said as long as they say it’s ok and if something happens down the road they’ll still warranty it I’m fine with it the way it is for now. I’ll put a few thousand rounds thru it and some classes and see how it goes.

  5. J Duclayan (verified owner)

    Impressed on the quality and design of this plate. The tight tolerance leaves no gap on the slide. I wish I had the plate from Walther to compare but I have yet to receive it.

Only logged in customers who have purchased this product may leave a review.