CZ SHADOW 2 OPTICS READY V4 MIL / LEO to Trijicon RMR / SRO / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP w/Dovetail for GLOCK Compatible Sights

$104.45

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE, AND WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE. 

DIRECT MILL YOUR OPTIC CLICK HERE

(7 customer reviews)

In stock

Frequently Bought Together

Do-It-Right Bundle: Check all three of these products and hit "add to cart" for a 15% discount!

+ +
Price for all three: Original price was: $212.35.Current price is: $180.50.

The C&H Precision plates are designed, manufactured, and shipped from our small family-owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

Most of our plates feature a patented stainless steel T-Nut which provides an industry-leading six to seven threads of engagement.  Since all the mounting hardware is replaceable, if any mounting hardware is damaged it can be replaced without replacing the entire plate.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

Replaceable 416 Stainless Steel T-Posts for the maximum thread engagement

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – M3 x 6 MM FH Plate Mounting Screws

Qty 3 – 4-40 x .320 Trijicon RMR Optic Mounting Screws

Qty 3 – 4-40 x .280 FHB Holosun 507C /508T  Optic Mounting Screws

Qty 3 – 4-40 x .345 FHB Trijicon SRO , CHPWS COMP / EDC XL Optic Mounting Screws

Qty 3 – 4-40 x .250 FHB Optic Mounting Screws

Qty 3 – Patented 416 Stainless Steel T-Nuts

DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

MANUFACTURER

MODEL

RED DOT

, , , , ,

7 reviews for CZ SHADOW 2 OPTICS READY V4 MIL / LEO to Trijicon RMR / SRO / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP w/Dovetail for GLOCK Compatible Sights

  1. dsat2009 (verified owner)

    I was disappointed in the optic plate I received. When I set it on my optic ready CZ shadow 2 compact, I found it to be quite loose fitting. I expected it to fit tight within the cutout, and it was not. There is considerable gaps forward and aft between the plate, and the optic cut in the slide from the CZ factory. Then, when I went to test fit my 507comp, I found a large piece of milling scrap attached to the right side post. The front of the plate has a corner that’s notched. It appears that the material that was removed, was never cleaned off, and the top edge where the red dot butts up to also had a burr on it. Useing a small file, I was able to clean up the areas easy enough, just to find that the dot was the exact same fit. Sloppy. It easily slid forward and aft, just like the plate did within the slide cutout.. The mounting screws that were supplied come with a small amount of loktite already applied. I assembled the plate to the slide, then the dot to the plate, and everything snugged down fine. With the screws tight, everything appears to be secure. I haven’t fired the firearm yet, but I feel confident..
    For $105, I expected closer, tighter tolerances.. I was excited to see how many screws are included with the plate. That was a nice surprise. I’m underwhelmed with the QC of the plate that I received..

  2. dsat2009 (verified owner)

    I was disappointed in the optic plate I received. When I set it on my optic ready CZ shadow 2 compact, I found it to be quite loose fitting. I expected it to fit tight within the cutout, and it was not. There is considerable gaps forward and aft between the plate, and the optic cut in the slide from the CZ factory. Then, when I went to test fit my 507comp, I found a large piece of milling scrap attached to the right side post. The front of the plate has a corner that’s notched. It appears that the material that was removed, was never cleaned off, and the top edge where the red dot butts up to also had a burr on it. Useing a small file, I was able to clean up the areas easy enough, just to find that the dot was the exact same fit. Sloppy. It easily slid forward and aft, just like the plate did within the slide cutout.. The mounting screws that were supplied come with a small amount of loktite already applied. I assembled the plate to the slide, then the dot to the plate, and everything snugged down fine. With the screws tight, everything appears to be secure. I haven’t fired the firearm yet, but I feel confident..
    For $105, I expected closer, tighter tolerances.. I was excited to see how many screws are included with the plate. That was a nice surprise. I’m underwhelmed with the QC of the plate that I received..

Only logged in customers who have purchased this product may leave a review.