CZ SHADOW 2 OPTICS READY V4 MIL / LEO to Trijicon RMR / SRO / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP / COMP MAX w/Dovetail for GLOCK Compatible Sights
$107.99
THE MOST MODULAR, RUGGED, DURABLE, RELIABLE, AND WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.
DIRECT MILL YOUR OPTIC CLICK HERE
In stock
Frequently Bought Together
Do-It-Right Bundle: Check all three of these products and hit "add to cart" for a 15% discount!
The C&H Precision plates are designed, manufactured, and shipped from our small family-owned business in Coastal Georgia. Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.
Most of our plates feature a patented stainless steel T-Nut which provides an industry-leading six to seven threads of engagement. Since all the mounting hardware is replaceable, if any mounting hardware is damaged it can be replaced without replacing the entire plate.
SPECIFICATION:
Material: Plates are made from 6061 aluminum. All mounting hardware is Stainless Steel
Finish: Plates are MIL-SPEC Type III Hard Anodized – Black
Replaceable 416 Stainless Steel T-Posts for the maximum thread engagement
INCLUDED:
Qty 1 – Optic Plate
Qty 3 – M3 x 6 MM FH Plate Mounting Screws
Qty 3 – 4-40 x .320 Trijicon RMR Optic Mounting Screws
Qty 3 – 4-40 x .280 FHB Holosun 407C / 507C /508T Optic Mounting Screws
Qty 3 – 4-40 x .345 FHB Trijicon SRO / RMR HD Optoc Mounting Screws
Qty 3 – 4-40 x .370 CHPWS COMP / EDC XL / COMP MAX Optic Mounting Screws
Qty 3 – 4-40 x .250 FHB Optic Mounting Screws
Qty 3 – Patented 416 Stainless Steel T-Nuts
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.
Additional information
| MANUFACTURER | |
|---|---|
| MODEL | |
| RED DOT | HOLOSUN 407C / 507C / 508T, TRIJICON RMR, TRIJICON SRO, C&H COMP, C&H EDC XL, HOLOSUN 507Comp |
| Firearm Compatibility | CZ Shadow 2 Compact, CZ SHADOW 2 OPTICS READY V4 MIL / LEO, CZ Shadow 2 OR |
| Optic Compatibility | C&H COMP, C&H Comp Max, C&H EDC-XL, Holosun 407C, Holosun 507C, Holosun 507Comp, Holosun 508T, Trijicon RMR |
| Supported Optics Brand | |
| Supported Firearm Brand |
7 reviews for CZ SHADOW 2 OPTICS READY V4 MIL / LEO to Trijicon RMR / SRO / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP / COMP MAX w/Dovetail for GLOCK Compatible Sights
Only logged in customers who have purchased this product may leave a review.
dsat2009 (verified owner) –
I was disappointed in the optic plate I received. When I set it on my optic ready CZ shadow 2 compact, I found it to be quite loose fitting. I expected it to fit tight within the cutout, and it was not. There is considerable gaps forward and aft between the plate, and the optic cut in the slide from the CZ factory. Then, when I went to test fit my 507comp, I found a large piece of milling scrap attached to the right side post. The front of the plate has a corner that’s notched. It appears that the material that was removed, was never cleaned off, and the top edge where the red dot butts up to also had a burr on it. Useing a small file, I was able to clean up the areas easy enough, just to find that the dot was the exact same fit. Sloppy. It easily slid forward and aft, just like the plate did within the slide cutout.. The mounting screws that were supplied come with a small amount of loktite already applied. I assembled the plate to the slide, then the dot to the plate, and everything snugged down fine. With the screws tight, everything appears to be secure. I haven’t fired the firearm yet, but I feel confident..
For $105, I expected closer, tighter tolerances.. I was excited to see how many screws are included with the plate. That was a nice surprise. I’m underwhelmed with the QC of the plate that I received..
dsat2009 (verified owner) –
I was disappointed in the optic plate I received. When I set it on my optic ready CZ shadow 2 compact, I found it to be quite loose fitting. I expected it to fit tight within the cutout, and it was not. There is considerable gaps forward and aft between the plate, and the optic cut in the slide from the CZ factory. Then, when I went to test fit my 507comp, I found a large piece of milling scrap attached to the right side post. The front of the plate has a corner that’s notched. It appears that the material that was removed, was never cleaned off, and the top edge where the red dot butts up to also had a burr on it. Useing a small file, I was able to clean up the areas easy enough, just to find that the dot was the exact same fit. Sloppy. It easily slid forward and aft, just like the plate did within the slide cutout.. The mounting screws that were supplied come with a small amount of loktite already applied. I assembled the plate to the slide, then the dot to the plate, and everything snugged down fine. With the screws tight, everything appears to be secure. I haven’t fired the firearm yet, but I feel confident..
For $105, I expected closer, tighter tolerances.. I was excited to see how many screws are included with the plate. That was a nice surprise. I’m underwhelmed with the QC of the plate that I received..