Slide Optic Milling Service For GLOCK 42/43/43X/48
From: $125.00
**If you have a MOS Glock 43x/48 Please refer to our MOS GLOCK 43X / 48 FOR HOLOSUN 407K / 507K / EPS and Trijicon RMRcc SLIDE MILLING UPGRADE page for milling options.
**Larger optics can only be milled in the all-the-way back position on G43(x)/G48 slides due to the milling entering the cavity for the firing pin block if it is milled in the standard position in front of the rear sight. A new rear sight dovetail can be milled in front of the RMRcc optic cut if you want to use backup iron sights.
**Glock 42 Slides can only be milled for the CHPWS RMSc-EDC, Holosun 407k/507k/EPS, Shield RMS/RMSc, Sig Romeo0, or an optic that shares one of these footprints and must be milled in the all-the-way back position with no new rear dovetail in front of the optic cut.
**Glock 42 slides cannot be milled for any top windows. Only optic cuts.
**The pictures of each modification are an example of what only choosing that modification will look like on the slide. Modifications performed may not look exactly as depicted depending on your slide model and the combination of serrations, windows, and/or pockets you chose.
Welcome to the #boomsquad!
Shipping instructions will be provided after your purchase.
Shipping Instructions for Your Slide Customization:
- Remove the slide from your pistol.
- If you selected “disassembled”, remove all internals and iron sights
- Include a copy of your order confirmation or a note with your name, phone, email, and order number.
- Sending your optic is strongly recommended – it ensures perfect fitment, and we’ll mount it for free.
- Use a sturdy box. Do NOT use envelopes.
- Ship your slide using any major carrier: UPS, FedEx. WE STRONGLY DISCOURAGE discourage using USPS due to lost shipments and lack of tracking.
Send your package to:
CHPWS – “ATTN: Slide Milling”
55 Mustang Ct.
Richmond Hill GA 31324
Questions? – Call us 912-445-5803
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.
THIS PRODUCT HAS BEEN MODIFIED BY C&H PRECISION WEAPONS LLC
Additional information
| Weight | 5.01 lbs |
|---|---|
| Dimensions | 6 × 1 × 1 in |
| SHIPPING: | |
| MANUFACTURER |
Nicholas Gums –
Very pleased with the service. Sent my Glock 42 in for milling for eps carry and sniper grey slide finish. Sent slide in and got an email when they received it. Had my slide back to me in two and a half weeks. Very clean milling and the sniper grey finish looks awesome. Very quick and good service. Thank you! A++
tcclindy –
My wife wanted a red dot on her Glock 42, we decided go with C&H, we were told it could take 30 days, from the time we mailed our slide and got it back was under two weeks. You cannot find better service than that. When I mounted the red dot and took it to the range to zero there was a serious problem, the cut on the slide was so precise I did not have to adjust the dot, it was dead on target. This screams quality machining and I would not hesitate in recommending C&H to anyone.
Jeff Shoebotham –
Couldn’t be happier. Everyone else doing slide milling quotes 2-3 months, I had my slide back in 3 weeks. Cut perfectly and great cerakoting job as well.
James Alexander Ivens –
My expectations have been exceeded. The cuts look very well done, and for the 507K. Glad to do business with C&H.
Terry Guinn –
Had a slide milled for a 43 with a Holosun. CHPWS has great customer service and will keep in contact with you. They did a excellent job on milling the slide the optic fit with no problems