SIG P226/P229 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

$60.45

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE. 

DIRECT MILL YOUR OPTIC CLICK HERE

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

**FOR TRIJICON RCR, READ DESCRIPTION BELOW**

(15 customer reviews)

Out of stock

Want to be notified when this product is back in stock?

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES ABOVE TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

This filler plate does not require any additional screws.  It is held in place with the RDS and it’s mounting screws.

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – 6-40 x .3125 M3H Holosun 507C / 508T Optic Mounting Screws

Qty 3 – 6-40 x .380 M3H Trijicon RMR / SRO Optic Mounting Screws

Qty 3 – 6-40 x .460 M3H CHPWS COMP / EDC XL Optic Mounting Screws

**Trijicon RCR**

The RCR Optic comes with Trijicon screws that are “Patented”.  You must use the screws they provide you.  C&H will not make new screws for this optic / plate combo.  It is the responsibly of the consumer to check fitment of the provided screws for length. The screws may have to be slightly modified or shortened in order to ensure proper fitment.

Agency / Department Discount Program

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

Weight .3 lbs
MANUFACTURER

MODEL

,

RED DOT

, , , , ,

15 reviews for SIG P226/P229 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

  1. srlandas (verified owner) –

    This adaptor plate fit perfect on my new Sig P226 Pro Cut slide. I installed a Holosun 507C-GR X2 and the plate filled in the space between the slide and the optic. The plate also had two circular nubs on the front of the slide that fit directly in the holes at the bottom the Holosun. This created a solid platform with no movement occurring once it was mounted. C&H included a small tube of thread lock and the correct screws that mount the Holosun to the Pro Cut slide. The screws that came with the Holosun are not the correct screws for the Pro Cut slide. I put in 200 rounds since the installation and have not had any issues. C&H will be my go to company the next time I need an adaptor plate.

  2. Jason Ringle (verified owner) –

    The plate fits my P229 Legion perfectly, and has a nice seamless look. My only issue is, i am not a fan of the supplied screws. They didn’t thread smoothly, and they have no finish on them, so i have to finish them myself. With what i have invested in the firearm and optic, i would rather not have to color my screws with a paint pen or sharpie, so i am looking for alternatives. Overall i am happy with the filler plate, just wish they supplied better screws.

  3. Salvatore Fameli (verified owner) –

    Fit my Sig P226 pro cut optic ready perfectly! They even included thread lock! A++ plate! Highly recommended

  4. capozzijohn (verified owner) –

    Well built and excellent fitment, as is standard with everything I’ve bought from CHPWS.

  5. drw255 (verified owner) –

    Great plate that fits perfect and takes up the slack in the Romeo1Pro milled footprint of the slide. Excellent set of screws included that easily allowed to use 12 in/pds of torque over the recommended 10 in/pds. Be sure to keep the plate on a plate surface while degreasing and handling as warping could be introduced in not handled correctly.

Only logged in customers who have purchased this product may leave a review.

SKU: SG69-RSH-FIL Category: Tag:

Related products