SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

$60.45

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

**FOR TRIJICON RCR, READ THE DESCRIPTION BELOW**

**This plate is for slides that DO NOT LOSE the rear iron sight when the cover plate is removed** 

DIRECT MILL YOUR OPTIC CLICK HERE

(66 customer reviews)

In stock

Frequently Bought Together

Do-It-Right Bundle: Check all three of these products and hit "add to cart" for a 15% discount!

+ +
Price for all three: $143.10

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES ABOVE TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

This filler plate does not require any additional screws.  It is held in place with the RDS and it’s mounting screws.

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – 6-40 x .380 M3H Holosun 507C / 508T Optic Mounting Screws

Qty 3 – 6-40 x .460 M3H Trijicon RMR / SRO , CHPWS COMP / EDC XL Optic Mounting Screws

**Trijicon RCR**

The RCR Optic comes with Trijicon screws that are “Patented”.  You must use the screws they provide you.  C&H will not make new screws for this optic / plate combo.  It is the responsibly of the consumer to check fitment of the provided screws for length. The screws may have to be slightly modified or shortened in order to ensure proper fitment.

Agency / Department Discount Program

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

Weight .3 lbs
MANUFACTURER

MODEL

,

RED DOT

, , , , , ,

66 reviews for SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

  1. Jonathan Newberg (verified owner)

    Fits perfectly to my new Raze P320 slide with Trijicon RMR. I’ve only shot 500 rounds with the new plate but extremely happy with the craftsmanship and support it gives my optic.

  2. cheffield (verified owner)

    Great product, perfect fit. Just what I Needed

  3. samuelyang2018 (verified owner)

    It’s fit perfectly for my p320 X Compact R2 Base Plate Rear. Put a Holosun 407c x2 on its and flush perfectly.

  4. caseytsunami (verified owner)

    Plate does not fit my pro cut slide – a work in progress – cannot get a hold of company for a return (called twice, left message & sent in contact form)

    I have a full size pro-cut slide from Sig “Compatibility: ROMEO1-PRO, ROMEO2, Delta Point Pro, and RMR (requires sealing plate) footprint.”

    It seemed like these plates had good reviews and discussion in other forums to do the job of filling the remainder in the slide. However, they do not fit my slide as advertised in the forums and in the installation videos on C&H. There is room for play and I need to return the fill plate.

    I still need to try it on my AXG Classic slide when it comes back from the shop (extracting a screw) – TBD – this is also a slide cut for Romeo1, DPP, and with RMR holes. Hoping the plate works for this slide but as of now I need to return one or both. Please help.

  5. themudman1964 (verified owner)

    Perfect fit for my p320 x10….provided the correct screws to install the Holosun 508t (which does not come with correct screws) the plate fits perfectly to provide a snug platform for the optic

Only logged in customers who have purchased this product may leave a review.