SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

$60.45

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

**FOR TRIJICON RCR, READ THE DESCRIPTION BELOW**

**This plate is for slides that DO NOT LOSE the rear iron sight when the cover plate is removed** 

DIRECT MILL YOUR OPTIC CLICK HERE

(69 customer reviews)

In stock

Frequently Bought Together

Do-It-Right Bundle: Check all three of these products and hit "add to cart" for a 15% discount!

+ +
Price for all three: Original price was: $168.35.Current price is: $143.10.

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES ABOVE TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

This filler plate does not require any additional screws.  It is held in place with the RDS and it’s mounting screws.

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – 6-40 x .380 M3H Trijicon RMR / RMR HD / SRO , Holosun 507C / 508T Optic Mounting Screws

Qty 3 – 6-40 x .460 M3H CHPWS COMP / EDC XL Optic Mounting Screws

**Trijicon RCR**

The RCR Optic comes with Trijicon screws that are “Patented”.  You must use the screws they provide you.  C&H will not make new screws for this optic / plate combo.  It is the responsibly of the consumer to check fitment of the provided screws for length. The screws may have to be slightly modified or shortened in order to ensure proper fitment.

Agency / Department Discount Program

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

Weight .3 lbs
MANUFACTURER

MODEL

,

RED DOT

, , , , , ,

69 reviews for SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

  1. j.ghfdmech (verified owner)

    Perfect fit always a awesome product installation was easy. Shipping to Hawaii was great and on time thank you C&H Precision

  2. Amir Aftahi (verified owner)

    I bought this for my P320 build. Using a legion comp slide and RM06. Thanks to the Sig CS rep who told me about CHPWS. One note, the description says to use the longer 6-40x.460 screws for the RMR but I found that with my slide the screws began to strip slightly and the RMR was not flush. I tried the shorter .380 screws and it fits like a glove. Excellent product, fills the gap between the R1P cut and the RMR hopefully significantly reducing the stress on the screws. Sig makes it hard to mount non sig dots but thankfully businesses like CHPWS exist to make our builds possible.

  3. Jocent Tanseco (verified owner)

    Product worked great. Fit so perfectly.

  4. nicholsirc (verified owner)

    Screws included for RMR are too long for the extractor side of the P320. When installed, the screw on the extractor side impinges on the extractor spring, preventing proper cycling. I was able to make it work by filing two threads from the screw, but this is not acceptable when we’re paying over $60 for a thin piece of metal and two screws. Also, the filler plate was too short to create a proper fit, allowing it to slide forward and back, and defeating the purpose of the filler plate. Do better, CHPWS.

    • C&H Precision

      Dear nicholsirc,

      We apologize for you not having the best experience with our product. While we aim for perfect screw and plate length manufacturing tolerances at times make it very difficult. When you are having to match up products for four different manufacturers it becomes even harder. I do not see any correspondence from you in our system yet. We will be reaching out shortly to inquire about the issues and so we can see what can be done. Thank you for taking the time to let us know about your experience and we appreciate the chance to resolve any and all issues you are experiencing.

      Ian Jarrell
      Customer Service Manager
      C&H Precision

  5. Christopher Jones (verified owner)

    Thanks guys love the plate nice and thin

Only logged in customers who have purchased this product may leave a review.