SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / C&H EDC-XL / COMP / COMP MAX / Olight Osight X
$62.99
THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.
THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE
**FOR TRIJICON RCR, READ THE DESCRIPTION BELOW**
*** Does NOT work with the HOLOSUN 508T
**This plate is for slides that DO NOT LOSE the rear iron sight when the cover plate is removed**
DIRECT MILL YOUR OPTIC CLICK HERE
In stock
Frequently Bought Together
Do-It-Right Bundle: Check all three of these products and hit "add to cart" for a 15% discount!
This filler plate does not require any additional screws. It is held in place with the RDS and it’s mounting screws.
The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia. Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.
SPECIFICATION:
Material: Plates are made from 6061 aluminum. All mounting hardware is Stainless Steel
Finish: Plates are MIL-SPEC Type III Hard Anodized – Black
INCLUDED:
Qty 1 – Optic Plate
Qty 3 – 6-40 x .380 M3H Trijicon RMR / RMR HD / SRO , Holosun 407C/ 507C 507Comp Optic Mounting Screws
Qty 3 – 6-40 x .460 M3H CHPWS COMP / EDC XL / COMP MAX Optic Mounting Screws
**Trijicon RCR**
The RCR Optic comes with Trijicon screws that are “Patented”. You must use the screws they provide you. C&H will not make new screws for this optic / plate combo. It is the responsibly of the consumer to check fitment of the provided screws for length. The screws may have to be slightly modified or shortened in order to ensure proper fitment.
Agency / Department Discount Program
Additional information
| Weight | .3 lbs |
|---|---|
| MANUFACTURER | |
| Firearm Model Compatibility | P320 Full-Size, SIG P320 AXG Carry, SIG P320 AXG Combat, SIG P320 AXG Legion, SIG P320 AXG Pro, SIG P320 Compact, SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR, SIG P320 RXP Compact, SIG P320 RXP Full Size, SIG P320 RXP XFull Size, SIG P320 RXZP, SIG P320 Spectre Comp, SIG P320 Spectre COMP Blackout, SIG P320 XCompact, SIG P320 XFive DH3, SIG P320 XFull, SIG P320 XFull California Compliant, SIG P320 XTen, SIG P320 XTen Comp, SIG P320 XTen Endure |
| Optic Model Compatibility | C&H COMP, C&H Comp Max, C&H EDC-XL, Holosun 407C, Holosun 507C, Holosun 507Comp, Holosun 508T, Osight X, Trijicon RCR, Trijicon RMR, Trijicon RMR HD, Trijicon SRO |
| Supported Optics Brand | |
| Supported Firearm Brand |
Patrick Foley –
I have been trying to put a MRDS on my home built P320 Xcarry for over a year, finally ADE recommended CHPWS and what a difference it makes having the flexibility to purchase a high quality dot without paying a sig CEO part of his salary. Thanks for creating the adapter plate, if anything I would suggest making the holes about .008 bigger to allow the screw threads to enter the slide without forcing. B but great product
Darnell Laurent –
The is just what I needed. The only issue was the screws supplied with the plate were to long and caused a loading issue. I just used the screws that came with the HS507C X2-ACSS the longer set. Please advise if this is an issue or not. The screws supplied caused the extractor to lock where a round would not load.
Dinero Greene –
Purchased this for a P320 with a Pro-Cut slide. Holosun is my preferred pistol optic. This plate is a must for this setup. Fills gaps and ensures a solid mount on the pistol. Great product!
Tony Gongaware –
As described. Well done CHPW
dv8skis –
I discovered that this plate will work well on a P226 Pro-Cut slide with about 10-15 minutes of slow and careful dremel work. Just grind off the tabs at the front and one of the bumps on the bottom to get a perfect fit. I mounted a 507C on my P226. pro-cut slide. Great product and great company.