SLIDE OPTIC MILLING SERVICE FOR GLOCK PISTOLS
From: $125.00
Slide Model Notice:
All Models and Generations EXCEPT MOS models, G17L, G41*, G44, and G42/G43(x)/G48 (see below).
*G17L slides with a deep weight reduction cut on the bottom of the slide cannot be milled for any optic.
*The G41 cannot be milled for any optics that are attached by screwing into the slide due to the weight reduction cut on the bottom of the slide. We can mill these slides for side clamping optics such as the CHPWS Duty, Aimpoint Acro, or Holosun 509t.
**The pictures of each modification are an example of what only choosing that modification will look like on the slide. Modifications performed may not look exactly as depicted depending on your slide model and the combination of serrations, windows, and/or pockets you chose.
For G43(x), G48, and G42 milling use one of the pages below:
Shipping instructions will be provided after your purchase.
Shipping Instructions for Your Slide Customization:
- Remove the slide from your pistol.
- If you selected “disassembled”, remove all internals and iron sights
- Include a copy of your order confirmation or a note with your name, phone, email, and order number.
- Sending your optic is strongly recommended – it ensures perfect fitment, and we’ll mount it for free.
- Use a sturdy box. Do NOT use envelopes.
- Ship your slide using any major carrier: UPS, FedEx. WE STRONGLY DISCOURAGE discourage using USPS due to lost shipments and lack of tracking.
Send your package to:
CHPWS – “ATTN: Slide Milling”
55 Mustang Ct.
Richmond Hill GA 31324
Questions? – Call us 912-445-5803
Click here to view all of our Red Dot Adapter Plates.
Click here to view all of our Slide Milling Services.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that this
product is compatible with GLOCK pistols.
THIS PRODUCT HAS BEEN MODIFIED BY C&H PRECISION WEAPONS LLC
Additional information
| Weight | 5.01 lbs |
|---|---|
| MANUFACTURER |
friedrichs.warren –
I ordered a slide mill service and a Holosun EPS in the same order. Customer service was quick to respond when I had questions before placing the order. The milling and cerakote look great on the slide! CHPWS also installed the EPS on the slide with appropriate thread locker and put witness marks on the screws. All in all, the slide mill service was great! I sent in the slide with factory Glock sights installed along with a set of Ameriglo sights in their package. CHPWS installed the Ameriglo’s free of charge and even returned the factory Glock sights in a little zip lock baggy in the return box! The only reason I took one star off was that the rear Ameriglo sight was slightly off of center when I check everything with digital calipers. But, that’s not a big deal and was an easy fix with a sight pusher tool. Overall, great experience!
cdjohncox –
I had a Gen 5 Glock 26 milled to accept a Holosun EPS Carry which I also purchased on this website. I ordered the black nitride slide coating for increased durability. The slide was returned to me in about 3 weeks with the optic already mounted on it. Both the slide milling and the black nitride coating were perfect.. I would recommend C&H Precision to others and will not hesitate to have other pistol slides milled here.
zboyjason –
Not happy at all. Sent my slide in for a 509T cut and got it back fast but the riser was off center leaving my optic over hanging to one side. Then sent it back in to be “repaired” only to have it slightly more centered. Not happy, would not recommend, and will not use again.
A company with Precision in the name should actually have Precision.
Only giving 3 stars for the fast turn around.
Andrew Ronstadt –
Did a great job with my slide, the black nitride is stupendous, absolutely worth the extra cash. Turned it around extremely quickly, WEEKS ahead of estimate. Very happy, will definitely be a repeat customer.
Jesse Tyge –
I’ve sent two slides in for milling services and they turned out good but the second one I had sights added to the order and they either torqued the set screw too much or added loctite and my Allen bit broke off inside the set screw so I’m currently unable to adjust my rear sight.