Smith and Wesson M&P/M&P Shield SLIDE OPTIC MILLING SERVICE
This page is for NON-optic ready M&P and M&P Shield slides ONLY. To upgrade your optic ready M&P Shield Plus to directly mount the Holosun 407k/507k/EPS/EPS Carry CLICK HERE.
**M&P Shield/Shield Plus models can only be milled for the CHPWS EDC-RMSc, Holosun 407k/507k/EPS/EPS Carry, Sig Romeo0, Shield RMS/RMSc, and Trijicon RMRcc optics.
***Full Size M&P and M&P Shield slides that are cerakoted or black nitrided may need to have the striker channel liner replaced. If you send a new channel liner with the slide we will install it before shipping back to you, if a new channel liner is not included with the slide you may need to install one when you receive the slide back.
**Full size/compact non-optic ready M&P slides must have the rear dovetail milled away with the optic in the all the way back position. A Glock style dovetail is available to be milled behind the optic if desired.
**Full size/compact non-optic ready M&P slides cannot be direct milled for the CHPWS EDC RMSc, Holosun 407k/507k/EPS, Sig Romeo0, and Shield RMS/RMSC optics. We do offer to mill the M&P 2.0 C.O.R.E optic ready cut to mount the Holosun 407k/507k or Holosun EPS/EPS Carry using our adapter plate.
**We cannot mill the M&P9 Shield EZ for any optic.
**The pictures of each modification are an example of what only choosing that modification will look like on the slide. Modifications performed may not look exactly as depicted depending on your slide model and the combination of serrations, windows, and/or pockets you chose.
Welcome to the #boomsquad !
Shipping instructions will be provided after your purchase.
M&P Slide Optic Milling Service from CHPWS – the best M&P Slide Milling for Optics
Click here to view our other Red Dot Adapter Plates.
Shipping Instructions for Your Slide Customization:
- Remove the slide from your pistol.
- If you selected “disassembled”, remove all internals and iron sights
- Include a copy of your order confirmation or a note with your name, phone, email, and order number.
- Sending your optic is strongly recommended – it ensures perfect fitment, and we’ll mount it for free.
- Use a sturdy box. Do NOT use envelopes.
- Ship your slide using any major carrier: UPS, FedEx. WE STRONGLY DISCOURAGE discourage using USPS due to lost shipments and lack of tracking.
Send your package to:
CHPWS – “ATTN: Slide Milling”
55 Mustang Ct.
Richmond Hill GA 31324
Instructions:
Safely remove the slide from your pistol. Remove all necessary internal components and iron sights if you selected to send your slide disassembled. Wrap it up, box it up and send it to us using your favorite shipping method (Fedex Ground / UPS / USPS). Please include a copy of your paid invoice or a note with your name, phone number, email address, and order number. We STRONGLY recommend sending your slide in a box and not an envelope. Most envelopes we receive get ripped open during transit and we have received a few empty envelopes. If you want to make sure your slide gets to us safely BOX IT UP.
Send your package to:
CHPWS – “ATTN: Slide Milling”
55 Mustang Ct.
Richmond Hill GA 31324
Questions? – Call us 912-445-5803
Additional information
| Weight | 5.01 lbs |
|---|---|
| Dimensions | 6 × 1 × 1 in |
| SHIPPING: | |
| MANUFACTURER |
Colin Haggerty –
Supplied screws would not work in one drilled/tapped hole. While all of the supplied screws worked just fine in the left hole required for mounting my optic, none of them would work in the right hole. It was like the internal threading just stopped and they would NOT screw in all the way. I applied as much force as I felt comfortable using without risking snapping the screw. Screws that came with my sight I bought where worked just fine in both holes. Very confused as to what could have caused this. I have a Glock 43 I want to send in for optics milling but am hesitant to use C&H again because of this. Still giving three stars because it worked with different screws.
Clay Ross –
Excellent service! They let me know when my slide got there and double checked on the work I wanted done. My optic fit like a glove on my newly milled slide. Quick turnaround. I will have them do any milling I need in the future.
kylenambat –
First time getting work done on my slide with C&H and I was very impressed to say the least. The milling and coating was precise. They even added the proper length screws to direct mount my optic of choice. The project was done in a very fast manner and it did not lack quality. Will be coming back for more!
mfritz3 –
Just got my Shield Plus PC slide back from C&H Precision and they did a great job. This is my 5th slide cut by them and it follows my previous experience – perfect fit and completed well within 4 weeks.
Michael Reilly –
As usual, now my 3rd firearm to have work on, great work. Optic mounts up tightly and the Cerakote looks great! now to shoot it and wear in some of that 🙂
You guys are my go to for work, period.