SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

$60.45

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

**FOR TRIJICON RCR, READ THE DESCRIPTION BELOW**

**This plate is for slides that DO NOT LOSE the rear iron sight when the cover plate is removed** 

DIRECT MILL YOUR OPTIC CLICK HERE

(68 customer reviews)

Out of stock

Want to be notified when this product is back in stock?

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES ABOVE TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

This filler plate does not require any additional screws.  It is held in place with the RDS and it’s mounting screws.

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – 6-40 x .380 M3H Trijicon RMR / RMR HD / SRO , Holosun 507C / 508T Optic Mounting Screws

Qty 3 – 6-40 x .460 M3H CHPWS COMP / EDC XL Optic Mounting Screws

**Trijicon RCR**

The RCR Optic comes with Trijicon screws that are “Patented”.  You must use the screws they provide you.  C&H will not make new screws for this optic / plate combo.  It is the responsibly of the consumer to check fitment of the provided screws for length. The screws may have to be slightly modified or shortened in order to ensure proper fitment.

Agency / Department Discount Program

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

Weight .3 lbs
MANUFACTURER

MODEL

,

RED DOT

, , , , , ,

68 reviews for SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP

  1. Khevin Larson (verified owner) –

    Fits and works great. They shipped very quickly which is what I needed. I would not hesitate to order from them again. Thank you!

  2. nick.hill6179 (verified owner) –

    Worked as described and expected. I will say fit and finish are flawless. The word “precision” in their name is very fitting for every product of theirs that I have touched. I recommend their products to anyone looking to add a MRDS to a pistol.

  3. mcmullen.colby (verified owner) –

    CH is a one-stop-shop for a solution to Sig’s goofy optics mounting interfaces. I researched for days looking for 6-40 flathead Torx screws and finally decided the SGRX-RSH-FIL was the best (and only) option. The product arrived in short order and was breeze to install. Fitment and tolerances were just as expected. The plate fit very snugly in the slide cut and the 508T bolted right up. The only issue I had was the 6-40 screws were not exactly the length advertised. Both sizes of screws measured .040-.050″ shorter. They worked fine but I had to use the Trijicon screws for the Holosun mounting. I highly recommend CH Precision optics plates. Thanks again!

    Sig P320 VTAC (July 2022 MFG date) with DPP/RMR cut for Holosun 508T.

  4. jason.rossi88 (verified owner) –

    So when it comes to mounting plates, I did a few days of research via ebay, amazon, youtube and google searches. An overwhelming amount of suggestions were for the CHPWS mounting plates. I needed a RMR plate for my Sig p320 xcompact to attach a Swampfox (RMR footprint) red dot. I was finally able to order a plate as they were sold out for a little while but I came quite quickly. I then received my Red dot and voila, they matched perfectly with ease. The connection is strong and my red dot stays put (good dog!)

    My ONLY complaint and it’s more of a preference then functionality. I do wish it was a little slimmer to compliment the slide better. There’s a tiny bit of overlap on either side. This however, is not a make or break and certainly does not interfere with slide functions. Overall, I’m quite happy I made this purchase and will most likely buy again depending on my future pistol/mounting needs.

  5. spindevil2000 (verified owner) –

    I got this plate to mount a holosun 507c to my p320 spectre. Fills the gap and is very thin. Perfect fit and finish. It looks better than I thought it would with everything mounted. I can cowitness with xray3 tall sights with no problem

Only logged in customers who have purchased this product may leave a review.

SKU: SGRX-RSH-FIL Category: Tag:

Related products