SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / Holosun 407C / 507C / 508C / 508T

$60.45

(47 customer reviews)

In stock

Frequently Bought Together

Do-It-Right Bundle: Check all three of these products and hit "add to cart" for a 15% discount!

+ +
Price for all three: $134.60

THIS PLATE REQUIRES A ROMEO 1 PRO OPTIC READY CUT WITH RMR HOLES, REFER TO THE PICTURES ABOVE TO VERIFY YOUR SLIDE HAS THE CORRECT HOLES AND CUT. IF YOUR SLIDE DOES NOT HAVE RMR / HOLOSUN THREADED HOLES OR NEEDS TO BE UPGRADED TO THE ROMEO 1 PRO CUT, CLICK HERE

This filler plate does not require any additional screws.  It is held in place with the RDS and it’s mounting screws.

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia.  Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.

SPECIFICATION:

Thickness:  V4 MIL / LEO Plates are .095″ to .099″ thick

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

INCLUDED:

Qty 1 – Optic Plate

Qty 2 – 6-40 Mounting Screws

Qty 2 – 6-40 Optic Mounting Screws

Additional information

Weight .3 lbs
MANUFACTURER

MODEL

RED DOT

, ,

47 reviews for SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes – Filler Plate for Trijicon RMR / SRO / Holosun 407C / 507C / 508C / 508T

  1. jdn3rd1 (verified owner)

    It started out Rocky. Your representative at first was trying to get me to buy the wrong plate. After looking through all the plates I finally figured out what I needed and then had to talk him into agreeing with my choice. When installing the plate the left hand screw was the right length but the right hand screw hit the extractor mechanism before becoming tight so I had to use a file and honing stone and remove a slight amount of metal at a time and check the fit only to have to do it again and again. I did eventually get it right and I’m now satisfied with the product. That right hand screw ended up considerably shorter than the other one. It seems that since this is a custom plate you could have sent out screws that were the right length. Then I could have given you a 5 star rating

  2. ritchieric (verified owner)

    Worked as described. I mounted up my new Holosun RDS and will be testing it and zeroing this weekend. Only reason for the 4 stars is the price.

  3. Chuck Sohm (verified owner)

    Plate snapped into the Romeo 1 Pro slide cut and the Holosun 407C fit on it perfectly. Followed instructions in the video and within a couple minutes the job was done. Left it alone for 24 hours for the included thread bonding agent to cure. No special skills required. Only need a #10 torx wrench and 10 inch pounds of force. Piece of cake.

  4. jatollette (verified owner)

    Perfect Fit, I originally ordered plates for the 407k instead of the needed 407c. They took em back and I got the correct plates pretty quick. Absolutely the lowest adapter plate possible. Fit my p320 AXG and p320 X-Ten perfectly.

  5. tomc4499 (verified owner)

    Mated with my optic wonderfully and I love the thinness of the plate.

Only logged in customers who have purchased this product may leave a review.