V4 MIL/LEO Adapter Holosun EPS / EPS Carry Fits GLOCK MOS

$76.95

THE MOST MODULAR, RUGGED, DURABLE, RELIABLE AND MOST WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE.

DIRECT MILL YOUR OPTIC CLICK HERE

(17 customer reviews)

Out of stock

Want to be notified when this product is back in stock?

SPECIFICATION:

Material: Plates are made from 6061 aluminum.  All mounting hardware is Stainless Steel

Finish:  Plates are MIL-SPEC Type III Hard Anodized – Black

Replaceable 416 Stainless Steel T-Posts for maximum thread engagement

INCLUDED:

Qty 1 – Optic Plate

Qty 3 – M3 x 6 MM Plate Mounting Screws

Qty 3 – 4-40 x .320 FHB Holusn EPS / EPS Carry Optic Mounting Screws

Qty 3 – Patented 416 Stainless Steel T-Nuts

DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols

DRY-FITTING DISCLAIMER:
At C&H Precision, our products are designed and manufactured to meet tight tolerances. Installation can be affected by variations in your plate, hardware, optic, and firearm tolerances. For safe installation and to prevent potential damage to any component, we advise dry-fitting all parts before a full installation. If any problems arise during this process, please reach out to our Customer Service via our contact portal.
­
IRON SIGHTS DISCLAIMER:
When making aftermarket firearm modifications, factory components can often become obsolete, particularly when mounting optics on the slide, whether through direct milling or using a plate. Achieving the correct height for low co-witness iron sights depends on factors such as the firearm type, mounting plate, optic, and slide cut. For assistance in determining the appropriate iron sight height for your specific setup, please contact our Customer Service team through our dedicated contact portal.

Additional information

MANUFACTURER

MODEL

, , , , , , , , , , ,

RED DOT

17 reviews for V4 MIL/LEO Adapter Holosun EPS / EPS Carry Fits GLOCK MOS

  1. Daniel Hoffman (verified owner) –

    It actually fit better than the plate that came with my Glock 40.

    The Glock 40 came with a Trigicon plate and the Holosun came with a Trigicon adapter plate. The screws that fit the Trigicon adapter plate were too long and bottomed out way too soon. I didn’t like the idea of stacking plates anyway, so I got this plate.

    Following instructions resulted in an excellent fit.

  2. Macauly Shope (verified owner) –

    Fits perfect solid construction

  3. Jerry Stark (verified owner) –

    WOW! This things fits perfectly! It has all the cutouts and studs matched to the EPS. Color matched perfectly and fills the entire cutout on the MOS slide! I did find one issue with the stainless steel screws. They split the locking nuts. They have the blue LokTite on the screws and it was hard as a rock. It’s almost like the screws were too big, and I guess they were. They all cross threaded and destroyed the locking nuts. Luckily I bought the extra screw set because…not my first rodeo with red dot installation. The black screws work perfectly. What I did was I put the lock nuts on the plate and screwed the black screws in from the other side and that removed the factory LokTite and I used some of my own and installation was perfect. I tried to do this with one of the stainless steel screws and it stripped out the lock nut. So just ditch the stainless screws and use the black screws with the lock nuts and you’ll be fine. But this works perfectly! Very satisfied and highly recommend this product!
    Kornholeeoo: Shoot That Thang!

  4. Steve Vincent (verified owner) –

    Will be using C&H for all my optic mounting needs.

  5. Christian Sykes (verified owner) –

    Exceeded my expectations. Plate fit is superb. No issues with mounting hardware, seems QC issues with T-Posts from prior years have been resolved.

Only logged in customers who have purchased this product may leave a review.

SKU: GL-EPS Category: Tag:

Related products