2011 / 1911 / STI SLIDE OPTIC MILLING SERVICE
From: $119.00
All slides are evaluated when they arrive to determine that an optics cut can be safely milled into the slide. If we determine your slide cannot be upgraded, we’ll send it back to you at no charge and issue a complete refund.
Any 2011/1911/STI series 80 slide that has a safety plunger/firing pin block CANNOT be milled for any optic or adapter plate due to the cut going into the safety plunger/firing pin block cavity. The only exception is the Lionheart Regulus due to the cavity for the firing pin block not extending into the cut area.
**The CHPWS EDC-RMSc, Holosun 407K / 507k/EPS, Shield RMSc, Sig Romeo0 and Trijicon RMRcc can be direct milled to your slide without an adapter plate. All other optics must be mounted with the CHPWS cross plate.
**Both direct mill and CHPWS cross optic plate adapter cuts require the rear dovetail to be milled away. Most CHPWS cross plates incorporate a built in back up iron sight.
Lead Times:
4 Weeks or less or your next milling is FREE!
Clock starts the day we receive your slide. Clock stops the moment we contact you to let you know your slide is done and ready to ship. We will not ship your slide until we have verified from you that your shipping address is correct.
Excludes slides that require Black Nitride (we don’t do this in house)
Excludes slides that require custom new BUIS sights or optics that are on backorder (we don’t make them and can’t control lead times)
Welcome to the #boomsquad !
Shipping instructions will be provided after your purchase.
Shipping Instructions:
Safely remove the slide from your pistol. Remove all necessary internal components and iron sights if you selected to send your slide disassembled. Wrap it up, box it up and send it to us using your favorite shipping method (Fedex Ground / UPS / USPS). Please include a copy of your paid invoice or a note with your name, phone number, email address, and order number. **If you ordered the cross cut please leave the firing pin and firing pin retaining plate installed in the slide as the retaining plate will need to be milled down for the cross plate to be mounted.** We STRONGLY recommend sending your slide in a box and not an envelope. Most envelopes we receive get ripped open during transit and we have received a few empty envelopes. If you want to make sure your slide gets to us safely BOX IT UP.
Send your package to:
CHPWS – “ATTN: Slide Milling”
456 Edsel Dr. Suite D
Richmond Hill GA 31324
Questions? – Call us 912-445-5803
Additional information
| Weight | 5.01 lbs |
|---|---|
| Dimensions | 6 × 4 × 4 in |
| SHIPPING: | |
| MANUFACTURER |
27 reviews for 2011 / 1911 / STI SLIDE OPTIC MILLING SERVICE
Only logged in customers who have purchased this product may leave a review.
gbuban (verified owner) –
I could not be more pleased. I was concerned how the finish would look without any finishing after the cut. It looks like it did prior the cutting. Done on time, phone call clarifying order details and notice of shipping. Exceeded expectations and will highly recommend to others!
ncrm7x7 (verified owner) –
My slide arrived Monday per usps, got a call Monday around noon. They verified my address and answered all my questions. Said it should be done in a couple of weeks.
Received the slide on Friday of the same week. That’s quick! Milling is clean, cross slot fits plate well without any bind. Optic fits plate perfectly.
Did a quick 4 click bore sight and tomorrow morning I will be sighting it in and enjoying my low set optic on my 1911.
Very happy, C&H will be getting more of my pistols for their plates and milling.
Thank you C&H
Henry Ngo (verified owner) –
CHPWS was super easy to work with and got everything I asked for. Their ordering was very simple and everything was laid out to every specification of the milling process. It was done super quick and the slide service was done neat and quality. They mounted my new back up sights and red dot with no extra charge. I am really happy as went with another shop and they still have my slide and it’s been 2 months! My slide was done in less than a week! That is amazing! Also, this company is not just another company they have pride and respect for your time and equipment. Customer for life!
Rob Ritch (verified owner) –
I had the slide for my Tisas 1911 Carry B9R direct milled for a Holosun 407k/507k optic and Cerakote finished. It was a little under 3 weeks from the time I shipped it to CHPWS to the time I received it back. They were great with communication prior to me ordering, once they received my slide and optic and again before they started the work to verify what I wanted done. I received the slide back with my provided optic installed already. The slide milling quality was excellent and the optic fits perfectly. The Cerakote looks great and is at least as good if not better quality than the original factory finish on the slide. I am extremely happy with the work done, the time it took, and the cost. CHPWS’ cost was lower than several other places I looked at and in some cases significantly lower. This is my first 1911 and now I seem to have caught the bug so I am sure that I will be sending more work their way in the future.
Rich Happersberger (verified owner) –
CHPWS received my 1911 slide on 10/16 and returned on 11/2. Had them mill for their COMP red dot and a nitride finish. The slide/plate interface is a perfect fit and the new finish is without complaint. The COMP is perfect of senior eyes. The turn time is most surprising. This is my third project with CHPWS and would like to do more, but ran out of guns.