2011 / 1911 / STI SLIDE OPTIC MILLING SERVICE
From: $119.00
All slides are evaluated when they arrive to determine that an optics cut can be safely milled into the slide. If we determine your slide cannot be upgraded, we’ll send it back to you at no charge and issue a complete refund.
Any 2011/1911/STI series 80 slide that has a safety plunger/firing pin block CANNOT be milled for any optic or adapter plate due to the cut going into the safety plunger/firing pin block cavity. The only exception is the Lionheart Regulus due to the cavity for the firing pin block not extending into the cut area.
We cannot mill any .22 caliber 1911 slides.
**The CHPWS EDC-RMSc, Holosun 407K / 507k/EPS, Shield RMSc, Sig RomeoZero/RomeoZero Elite/RomeoX Compact (Romeo Zero Pro and R cannot be direct milled) and Trijicon RMRcc can be direct milled to your slide without an adapter plate. All other optics must be mounted with the CHPWS cross plate.
**Both direct mill and CHPWS cross optic plate adapter cuts require the rear dovetail to be milled away. Most CHPWS cross plates incorporate a built in back up iron sight.
** Most 1911/2011/STI slides are milled to the depth of the base of the rear sight dovetail or BOMAR cut. Slides with a shallow rear sight dovetail or no dovetail are milled to a depth of .200″ from the top of the slide if possible. This is to ensure the cut is flat and screw holes are milled properly. For slides with a deep dovetail this can mean some thinner base direct mount optics may have the bottom of the window slightly below the top of the slide and make optic integrated rear sights sit too low to be usable with stock front sights.
Lead Times:
4 Weeks or less or your next milling is FREE!
Clock starts the day we receive your slide. Clock stops the moment we contact you to let you know your slide is done and ready to ship. We will not ship your slide until we have verified from you that your shipping address is correct.
Excludes slides that require Black Nitride (we don’t do this in house)
Excludes slides that require custom new BUIS sights or optics that are on backorder (we don’t make them and can’t control lead times)
Welcome to the #boomsquad !
Shipping instructions will be provided after your purchase.
Shipping Instructions:
Safely remove the slide from your pistol. Remove all necessary internal components and iron sights if you selected to send your slide disassembled. Wrap it up, box it up and send it to us using your favorite shipping method (Fedex Ground / UPS / USPS). Please include a copy of your paid invoice or a note with your name, phone number, email address, and order number. **If you ordered the cross cut please leave the firing pin and firing pin retaining plate installed in the slide as the retaining plate will need to be milled down for the cross plate to be mounted.** We STRONGLY recommend sending your slide in a box and not an envelope. Most envelopes we receive get ripped open during transit and we have received a few empty envelopes. If you want to make sure your slide gets to us safely BOX IT UP.
Send your package to:
CHPWS – “ATTN: Slide Milling”
456 Edsel Dr. Suite D
Richmond Hill GA 31324
Questions? – Call us 912-445-5803
Additional information
| Weight | 5.01 lbs |
|---|---|
| Dimensions | 6 × 4 × 4 in |
| SHIPPING: | |
| MANUFACTURER |
40 reviews for 2011 / 1911 / STI SLIDE OPTIC MILLING SERVICE
Only logged in customers who have purchased this product may leave a review.
jvpaulson (verified owner) –
There was an error in the return shipping on my RIA Tac Ultra slide cut. C&H was on top of the issue with excellent communication and prompt resolution of the problem. The slide milling and Cerakote refinishing work was excellent and even with the shipping problem turnaround time was just a couple of weeks. I highly recommend.
crailey (verified owner) –
I sent my duty weapon, a Springfield 4.5 inch 1911 to C&H to be direct milled for a Holosun 507k. C&H did a fantastic job and did it quickly. After reviewing the quality and accuracy of the work performed by C&H, I have no problem recommending their slide services. Their communication was also top-notch, which I appreciate greatly.
Austin Nichols (verified owner) –
Sent in my slide and had it back way faster than expected! Looked like it was milled from the factory! Fit my RMRcc perfectly and I have an eye for interactions. Great job at a great price!
2lflat4 (verified owner) –
I chose the direct mount RMRcc and it fits the 1911 slide perfectly. It sits nice and low in the making it easy to find the dot. I don’t like the adapter plates because they put the optic too high. The slide was perfectly milled, ceracoated, and quickly delivered back to me. Highly recommended.
Darryl Paris (verified owner) –
Sent in my Springfield EMP 40 for a direct cut for my RMRcc. They called when they received it, very professional and eased my mind with sending expensive optics & slide. I received notification my package was on it’s way in approx 2+ weeks, again nice knowing where my products are. I was very surprised that my RMRcc was installed and witness marks on screws, bonus! Fit and finish are great, highly recommend their service!