SLIDE OPTIC MILLING SERVICE FOR GLOCK PISTOLS
From: $125.00
Slide Model Notice:
All Models and Generations EXCEPT MOS models, G17L, G41*, G44, and G42/G43(x)/G48 (see below).
*G17L slides with a deep weight reduction cut on the bottom of the slide cannot be milled for any optic.
*The G41 cannot be milled for any optics that are attached by screwing into the slide due to the weight reduction cut on the bottom of the slide. We can mill these slides for side clamping optics such as the CHPWS Duty, Aimpoint Acro, or Holosun 509t.
**The pictures of each modification are an example of what only choosing that modification will look like on the slide. Modifications performed may not look exactly as depicted depending on your slide model and the combination of serrations, windows, and/or pockets you chose.
For G43(x), G48, and G42 milling use one of the pages below:
Shipping instructions will be provided after your purchase.
Shipping Instructions for Your Slide Customization:
- Remove the slide from your pistol.
- If you selected “disassembled”, remove all internals and iron sights
- Include a copy of your order confirmation or a note with your name, phone, email, and order number.
- Sending your optic is strongly recommended – it ensures perfect fitment, and we’ll mount it for free.
- Use a sturdy box. Do NOT use envelopes.
- Ship your slide using any major carrier: UPS, FedEx. WE STRONGLY DISCOURAGE discourage using USPS due to lost shipments and lack of tracking.
Send your package to:
CHPWS – “ATTN: Slide Milling”
55 Mustang Ct.
Richmond Hill GA 31324
Questions? – Call us 912-445-5803
Click here to view all of our Red Dot Adapter Plates.
Click here to view all of our Slide Milling Services.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that this
product is compatible with GLOCK pistols.
THIS PRODUCT HAS BEEN MODIFIED BY C&H PRECISION WEAPONS LLC
Additional information
| Weight | 5.01 lbs |
|---|---|
| MANUFACTURER |
shuey134 –
Had a Holosun 509T milled slot done on a Gen 3 Glock 19. The work was done quickly within the quoted timeframe and came back looking great. I had the cerekote done only on the milled part because I wanted to keep the worn look of my old G19 intact, finish was great. I plan to use this service again.
Brian Donovan –
This is actually my 2nd time with having a slide milled with C&H, but this is my 1st review. First milling I had done was on my wife’s Glock 43x which is her EDC. The milling and finish work is 100% perfect! Red dot mounted perfectly and the screws were provided. She couldn’t be happier with it! When I recently (June 2023) decided to mill my Glock 45 I knew where to go. My slide was back in 2 weeks including shipping both ways. The milling and finish were excellent as before. Couldn’t ask for better service or milling work. Got a few more I’d like to do so I’ll definitely be back! I also purchased a plate for my Glock 43x MOS awhile back. It fit perfectly and is still mounted to this day. Thank you so much for the service you are providing!
cdjohncox –
Since Glock does not offer a G26 MOS, I had C&H Precision mill a Gen 5 G26 slide to accept a Holosun EPS Carry. The milling work was well done and they mounted the EPS Carry to the slide before returning it. The work was performed in a timely manner. I had the slide coated in black nitride after the milling which I highly recommend. The combination of the G26 and Holosun EPS Carry is easy to carry concealed and performs well at the range.
Tristan Harrelson –
Overall was a good job. Cerakote was perfect and optic cut was as well. The rear dovetail sight cut was not. It was way to tight to fit the rear sight. The rear sight ended up having to be filled quite a bit for proper fitment. Customer service was great with helping with any questions and warranty concerns. They offered to ship the slide back and fix it for free. Other than the rear dovetail being jacked it was a perfect and affordable option. Warranty was great and will definitely use them again.
Rich Happersberger –
Had a Bushnell red dot installed on a G17 that was not listed on the website (choose other from the options). Three weeks later the UPS man showed with the finished product. Perfect milling/fitment and of course witness marks are on the installation screws for reference. All in all a very fine experience with CHPWS.